Cordless Combi Tool, part of the Holmatro Pentheon Series. Designed to offer you the unrestrained performance, unparalleled speed and ultimate control you’ve never experienced before! This multifunctional tool can be used for cutting, spreading and squeezing and is therefore suitable for a variety of applications, ranging from forcible entry to extrication of persons trapped.

Basic specifications
max. working pressure720 / 72 (bar/Mpa)10443 psi
battery includedno
max. spreading force1350 / 137.7 (kN/t)303492 lbf
min. spreading force (EN 13204)48 / 4.9 (kN/t)10791 lbf
spreading distance281 mm11.1 in
max. cutting opening196 mm7.7 in
max. squeezing force44 / 4.5 (kN/t)9892 lbf
protection rateIP57
directives2006/42/EC, 2014/30/EU
theoretical cutting force268 / 27.3 (kN/t)60249 lbf
Dimensions, weight and temperature
weight, ready for use13.8 kg30.4 lb
weight excl. battery12.3 kg27.1 lb
dimensions (AxBxC)677 x 270 x 275 mm26.7 x 10.6 x 10.8 in
EN 13204 classificationBK48/281-E-13.8
NFPA 1936, cutting capacityA5 B5 C5 D6 E4 F3
NFPA 1936 compliantyes
EN 13204, cutting capacity1E 2E 3E 4E 5E
EN 13204 compliantyes
NFPA 1936, HSF52 / 5.3 (kN/t)11690 lbf
NFPA 1936, LSF40 / 4.1 (kN/t)8992 lbf
Cutting performance
round bar (S235 acc. to EN 13204)24 mm0.9 in

Unparalleled Speed

Fastest Combi Tool on the market, thanks to Stepless Speed Maximization (PATENTED). A mechatronic system inside the tool continuously optimize the motor and pump settings to deliver a maximized oil flow over the full pressure range. This results in unparalleled speed for spreading and cutting of doors, fences and other obstacles. That means even shorter breaching operations, maximizing safety of the operator and minimizing the response time of the target. 

Where all other hydraulic breaching tools show a significant decrease in speed when switching to another stage to deal with higher loads, Holmatro Pentheon tools stick to the ideal stepless speed curve.

Ultimate Control

A unique two-mode control handle for ultimate speed control offers you the choice, at any time during the breaching operation, to switch between the tool’s high-speed and low-speed modes. This allows you to accurately position the tool at low speed and then operate it at high speed.

Within these two modes the speed is still proportional to how far you turn the control handle to its left or right.

Extended working time thanks to:

A purpose-built battery with increased capacity

The energy efficiency of our patented mechatronic drive technology.

An Auto Start/Stop function. When the tool is not operated or has reached its maximum pressure, the motor stops automatically. This saves valuable battery capacity. Simply turn the control handle to restart the tool.

Minimum sound level

If the tool is switched on, the engine will only start running when the control handle is activated/turned. When the controle handle is released, the engine and sound stop immediately, but the tool is still stand-by and ready for action.

Under water use

Should you encounter a situation where you need to use your breaching tools completely submerged in water, our Pentheon tools are up for the job!

Realtime diagnostics

LED indicators on the tool, battery and charger provide you with direct feedback on the battery’s temperature, state of charge and state of health, as well as the tool temperature and when the maximum pressure has been reached.

For more detailed battery information you can make use of our diagnostics software.

A more extensive software program for Authorized Holmatro (Dealer) Service Technicians will allow them to provide the best service for your Pentheon tools. It combines in-depth tool diagnostics with automated inspection procedures.

Ease of use

Inline control handle with 360° access.

360° Carrying handle. Goes all around the tool, so you can hold it in any position. Includes a suitcase grip for easy carrying. Made of a high-grade synthetic polymer: an extremely tough and elastic material that always returns into its original shape. Damage-proof!

The LED lights in the carrying handle can be switched on and off by a separate button.

Battery management made easy

Stop swapping batteries with Holmatro’s On-Tool Charging System. From now on you can charge a battery while it remains on the tool. Simply connect your tool to the charger and the whole charging process will regulate itself. The battery on the tool has priority over the one on the charger, which will resume charging when the battery on the tool is 100% full.